Product Name : METAL FILM RESISTORS
Description
INTRODUCTION:
MF series is a group of metal film-fixed resistors applying high Aluminum content base material vacuum sputtered by Ni-Cr alloy and excellent heat-and wet-proof special resin for protective coating . Those resistors are manufactured through integrated automatic production system and then have good stable and uniform property. Furthermore, they show excellent performance regardless open in air.
DIMENSIONS:
GENERAL SPECIFICATIONS:
MIL STYLE
STYLE
POWER RATING(W)
DIMENSION (mm)
MAX WORKING VOLTAGE
MAX OVERLODAD
L
D
H( MIN)
d
RN-50
MF-12
0.125W
3.7±0.4
1.8±0.2
27
0.46±0.02
200
400
RN-50
MF-16
0.125W
3.7±0.4
1.8±0.2
27
0.46±0.02
200
400
RN-55
MF-25
0.25W
6.8±0.5
2.5±0.2
27
0.53±0.03
250
500
RN-60
MF-50
0.5W
9.0±1.0
3.5±0.5
25
0.68±0.02
350
700
RN-65
MF-100
1W
12±1.0
4.5±0.5
33
0.80±0.03
500
1000
RN-70
MF-200
2W
16±1.0
5.5±0.5
33
0.80±0.03
500
1000
RN-75
MF-300
3W
17±1.0
6.0±0.5
30
0.80±0.03
600
1000
RESISTANCE RANGE:
MIL STYLE
STYLE
TOLERANCE
T C ±25PPM/℃
T C ±100PPM/℃
T C ±50PPM/℃
RN-50
MF-12
MF-16
±1%
±0.5%
±0.25%
±0.1%
10Ω~1MΩ
100Ω~1MΩ
51.1Ω~470KΩ
51.1Ω~470KΩ
1Ω~10MΩ
51.1Ω~470KΩ
RN-55
MF-25
±1%
±0.5%
±0.25%
±0.1%
0.1Ω~10MΩ
0.1Ω~10MΩ
10Ω~470kΩ
10Ω~470KΩ
0.1Ω~10MΩ
0.1Ω~10MΩ
RN-60
MF-50
±1%
±0.5%
±0.25%
±0.1%
0.1Ω~10MΩ
0.1Ω~10MΩ
10Ω~470kΩ
10Ω~470KΩ
0.1Ω~10MΩ
0.1Ω~10MΩ
RN-65
MF-100
±1%
±0.5%
±0.25%
±0.1%
0.1Ω~10MΩ
0.1Ω~10MΩ
10Ω~470kΩ
10Ω~470KΩ
0.1Ω~10MΩ
0.1Ω~10MΩ
RN-70
MF-200
±1%
±0.5%
±0.25%
±0.1%
0.1Ω~10MΩ
0.1Ω~10MΩ
10Ω~470kΩ
10Ω~470KΩ
0.1Ω~10MΩ
0.1Ω~10MΩ
RN-75
MF-300
±1%
±0.5%
±0.25%
±0.1%
0.1Ω~10MΩ
0.1Ω~10MΩ
10Ω~470kΩ
10Ω~470KΩ
0.1Ω~10MΩ
0.1Ω~10MΩ
Characteristic
Specification
Test Method
Operating Temp. Range
-55˚C ~ 155˚C
(All resistance measurements should be performed after stabilisation or conditioning periods).
DC RESISTANCE
Within specified tolerance.
MIL-STD-202
Method 303
TEMPERATURE COEFPICIENT
As buyer requested
±25PPM/℃ , ±100PPM/℃ , ±50PPM/℃
MIL-STD-202
Method 304
DIELECTRIC STRENGTH
No flashover or damage
MIL-STD-202
Method 301
1/8W 300V1 minute
1/4W 500V1 minute
1/2W 700V1 minute
1.2W 750V1 minute
INSULATION RESISTANCE
at least 1,000MΩ
MIL-STD-202
Method 302
1000V1 minute
CURRENT NOISE TEST
below 10kΩ below 0.05µV/V
10KΩ~below 0.1µV/V
below 1M7 below 0.2µV/V
MIL-STD-202
Method 308
VIBRATION
Δ R within ± (0.25%+0.05Ω)
MIL-STD-202
Method 201 10~HZ
X. Y. Z. 3directions
2 hours each
TORMINAL STRENGTH
Lead is not break or loose
MIL-STD-202
Method 211
RESISTANCE TO SOLDERING HEAT
Δ R with in ± (0.25%+0.05Ω)
MIL-STD-202
Method 210
350℃ , 3±0.05 sec
SOLDERABILITY
At least 95% coverage
MIL-STD-202
Method 208
230℃,5 sec
THERMAL SHOCK
Δ R within ± (0.5%+0.05Ω)
MIL-STD-202
Method 107
-55℃ , +155℃
5cycles
SHORT TIME OVERLOAD
Δ R within ± (0.5%+0.05Ω)
MIL-R-10509 Para,4,6,6,
2.5times rated
working voltage ,
5 seconds
HUMIDITY
Δ R within ± (1%+0.05Ω)
NO mechanical damage
MIL-STD-202
Method 103
40℃,
RH95%
500
LOW TEMPERATURE OPERATION
Δ R within ± (0.5%+0.05Ω)
MIL-R-10509
Para 4,6,5 rated working
voltage,at-65℃
45minutes.
LOAD LIFE
Δ R within ± (1%+0.05Ω)
MIL-STD-202
method 108
Rated working voltage 1.5 hours on.0.5 hours
off for total 1000 hours
RESISTANCE TO SOVENT
Color bands legible
No mechanical damage
MIL-STD-202
method 215
DERATING CURVE:
INTRODUCTION:
MF series is a group of metal film-fixed resistors applying high Aluminum content base material vacuum sputtered by Ni-Cr alloy and excellent heat-and wet-proof special resin for protective coating . Those resistors are manufactured through integrated automatic production system and then have good stable and uniform property. Furthermore, they show excellent performance regardless open in air.
DIMENSIONS: |
|
GENERAL SPECIFICATIONS:| MIL STYLE | STYLE | POWER RATING(W) | DIMENSION (mm) | MAX WORKING VOLTAGE | MAX OVERLODAD | |||
| L | D | H( MIN) | d | |||||
| RN-50 | MF-12 | 0.125W | 3.7±0.4 | 1.8±0.2 | 27 | 0.46±0.02 | 200 | 400 |
| RN-50 | MF-16 | 0.125W | 3.7±0.4 | 1.8±0.2 | 27 | 0.46±0.02 | 200 | 400 |
| RN-55 | MF-25 | 0.25W | 6.8±0.5 | 2.5±0.2 | 27 | 0.53±0.03 | 250 | 500 |
| RN-60 | MF-50 | 0.5W | 9.0±1.0 | 3.5±0.5 | 25 | 0.68±0.02 | 350 | 700 |
| RN-65 | MF-100 | 1W | 12±1.0 | 4.5±0.5 | 33 | 0.80±0.03 | 500 | 1000 |
| RN-70 | MF-200 | 2W | 16±1.0 | 5.5±0.5 | 33 | 0.80±0.03 | 500 | 1000 |
| RN-75 | MF-300 | 3W | 17±1.0 | 6.0±0.5 | 30 | 0.80±0.03 | 600 | 1000 |
RESISTANCE RANGE:
| MIL STYLE | STYLE | TOLERANCE | T C ±25PPM/℃ | T C ±100PPM/℃ T C ±50PPM/℃ |
| RN-50 | MF-12
MF-16 |
±1%
±0.5% ±0.25% ±0.1% |
10Ω~1MΩ 100Ω~1MΩ 51.1Ω~470KΩ 51.1Ω~470KΩ |
1Ω~10MΩ 51.1Ω~470KΩ |
| RN-55 | MF-25 | ±1%
±0.5% ±0.25% ±0.1% |
0.1Ω~10MΩ 0.1Ω~10MΩ 10Ω~470kΩ 10Ω~470KΩ |
0.1Ω~10MΩ 0.1Ω~10MΩ |
| RN-60 | MF-50 | ±1%
±0.5% ±0.25% ±0.1% |
0.1Ω~10MΩ
0.1Ω~10MΩ 10Ω~470kΩ 10Ω~470KΩ |
0.1Ω~10MΩ 0.1Ω~10MΩ |
| RN-65 | MF-100 | ±1%
±0.5% ±0.25% ±0.1% |
0.1Ω~10MΩ 0.1Ω~10MΩ 10Ω~470kΩ 10Ω~470KΩ |
0.1Ω~10MΩ 0.1Ω~10MΩ |
| RN-70 | MF-200 | ±1%
±0.5% ±0.25% ±0.1% |
0.1Ω~10MΩ 0.1Ω~10MΩ 10Ω~470kΩ 10Ω~470KΩ |
0.1Ω~10MΩ 0.1Ω~10MΩ |
| RN-75 | MF-300 | ±1% ±0.5% ±0.25% ±0.1% |
0.1Ω~10MΩ 0.1Ω~10MΩ 10Ω~470kΩ 10Ω~470KΩ |
0.1Ω~10MΩ 0.1Ω~10MΩ |
| Characteristic | Specification | Test Method |
| Operating Temp. Range | -55˚C ~ 155˚C | (All resistance measurements should be performed after stabilisation or conditioning periods). |
| DC RESISTANCE | Within specified tolerance. | MIL-STD-202 Method 303 |
| TEMPERATURE COEFPICIENT | As buyer requested ±25PPM/℃ , ±100PPM/℃ , ±50PPM/℃ | MIL-STD-202 Method 304 |
| DIELECTRIC STRENGTH | No flashover or damage | MIL-STD-202 Method 301 1/8W 300V1 minute 1/4W 500V1 minute 1/2W 700V1 minute 1.2W 750V1 minute |
| INSULATION RESISTANCE | at least 1,000MΩ | MIL-STD-202 Method 302 1000V1 minute |
| CURRENT NOISE TEST | below 10kΩ below 0.05µV/V 10KΩ~below 0.1µV/V below 1M7 below 0.2µV/V | MIL-STD-202 Method 308 |
| VIBRATION | Δ R within ± (0.25%+0.05Ω) | MIL-STD-202 Method 201 10~HZ X. Y. Z. 3directions 2 hours each |
| TORMINAL STRENGTH | Lead is not break or loose | MIL-STD-202 Method 211 |
| RESISTANCE TO SOLDERING HEAT | Δ R with in ± (0.25%+0.05Ω) | MIL-STD-202 Method 210 350℃ , 3±0.05 sec |
| SOLDERABILITY | At least 95% coverage | MIL-STD-202 Method 208 230℃,5 sec |
| THERMAL SHOCK | Δ R within ± (0.5%+0.05Ω) | MIL-STD-202 Method 107 -55℃ , +155℃ 5cycles |
| SHORT TIME OVERLOAD | Δ R within ± (0.5%+0.05Ω) | MIL-R-10509 Para,4,6,6, 2.5times rated working voltage , 5 seconds |
| HUMIDITY | Δ R within ± (1%+0.05Ω) NO mechanical damage | MIL-STD-202
Method 103
40℃, RH95% 500 |
| LOW TEMPERATURE OPERATION | Δ R within ± (0.5%+0.05Ω) | MIL-R-10509
Para 4,6,5 rated working
voltage,at-65℃ 45minutes. |
| LOAD LIFE | Δ R within ± (1%+0.05Ω) | MIL-STD-202 method 108 Rated working voltage 1.5 hours on.0.5 hours off for total 1000 hours |
| RESISTANCE TO SOVENT | Color bands legible No mechanical damage | MIL-STD-202 method 215 |
DERATING CURVE:
